Instructions for use

The Pp.k helmet provides basic personal protection and can be used in accordance with applicable road traffic regulations. To use the helmet correctly, please familiarize yourself with its features, fit and care. by reading these instructions carefully

The protective helmet complies with the Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC and with the EN397:2012+A1-2012 standard

Name of authorized representative:

PRUSPOL BHP

Product name: PP-K

CE

Size: #101 53-62 cm

Material: HDPE

Protection and ventilation

The outer casing makes your helmet one of the lightest in its class, while providing excellent strength and integrity. A large number of ventilation holes with internal air channels allow air to pass through

inside the helmet and above the forehead, ensuring maximum cooling.

Helmet Fit To provide adequate protection, a helmet must fit properly. Then, after fastening, it will not move forwards, backwards or sideways. To ensure a good fit, try different size combinations to best suit your head shape.

Retention system

Your helmet has a buckle that allows you to quickly open and fasten it without changing the fit. The belt must be tensioned evenly and comfortably. Place the helmet tightly on your head and fasten the buckle. If the strap is loose, tighten it after removing the helmet. To do this, hold the buckle with one hand, then thread the loose strap through it.

Storage, use, cleaning, maintenance and disinfection:

ATTENTION:

The helmet must fit tightly and evenly on the head. When using the helmet, the buckle must always be fastened. It is important that the helmet fits comfortably and fastened to ensure maximum safety. All settings must be checked each time the helmet is put on to ensure it is always correctly fitted

fitted.

Clean the helmet shell only with mild soap and water. The use of any solvent, paint or stickers may damage the helmet and render it unsafe in the event of an accident. The helmet should be stored and transported in a box or packaging that protects it against mechanical and high damage

temperatures.

It is not recommended to disinfect a protective helmet.

The helmet will be damaged if exposed to temperatures above 65°C. Dark vehicles or bags can reach this temperature on hot days. Damage caused by high temperature causes deformation and the surface of the helmet becomes uneven and blistered. A damaged helmet should be destroyed and replaced with a new one – the helmet shell is designed to absorb the force of an impact through partial or complete destruction. Even

the damage is invisible, after an impact during a fall the helmet should be destroyed or replaced with a new one. Unfortunately, some accidents involve head injuries that no helmet can prevent. Depending on the type of impact, serious or fatal head injuries can occur even at low speeds. Always ride very carefully and read the helmet instructions carefully.

Packaging: Helmets are packed single in plastic bags.

Jednostka notyfikowana: (2834) CCQS Certification Services Limited. Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin 15, D15 AKK1, Ireland

Producer: Prus-Pol Sp. z o. o.
NIP: PL9151795172