A modern, professional, electronic TDS meter by SUPREME for reverse osmosis enables very accurate measurement of TDS (ppm), conductivity (μm) or water temperature (OC).

The TDS meter is irreplaceable when assessing the quality of water subjected to osmotic filtration. Based on the results of the tester, it is possible

whether the osmotic membrane is working properly.

The TDS meter measures the amount of dissolved salts in water or its conductivity, the lower the result of both parameters, the purer the water. The meter can also measure raw water.

The device is equipped with the “HOLD” function, which, after pressing the button, locks the result displayed on the screen, thanks to which the reading of the tested parameters is possible after removing the device from the tested water sample.

Clean water, e.g. after osmotic filtration, it has a very small amount of dissolved substances, therefore the result given in ppm or μm should be at a low level, with the increase in the amount of dissolved substances, the tested water sample will have a higher TDS and conductivity.

SPECIFICATION:

– Battery type: Cr2032 (up to 1000 hours of operation)

– Backlit LCD screen: 34mm x 17mm

– TDS level < 40ppm (green light) – TDS level > 40ppm (red light)

– TDS measurement range: 0 – 4999 ppm, accuracy +/- 2%

– EC measurement range: 0 – 0.9999 μS, accuracy +/- 2%

– Temperature measurement range: 0-99OC, 32-212OF, accuracy +/- 0.1OC